Firmware update (Hard Disk Recorder SVR-HDT1000)

About this update:
This utility upgrades Hard Disk Recorder SVR-HDT1000 firmware to version 4.10.r8588 and provides the following benefits:

• Addition of Video data file playback feature.
  New format supported: MPEG-4 ASP with “.avi” extension.
  (For details about the "Playable types of files", please refer to the new Operating Instructions).

Warning:
Please confirm your recorder’s model name on the front panel.

• Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Recorder to be unresponsive or to require repair.
• Do not power off the Recorder or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the Recorder to be unresponsive or to require repair.

Before you start:

1. Please use a quality branded USB memory stick to perform the firmware update.
   *Some USB memory sticks may not be recognized.
2. You need a computer with a USB memory slot to copy the software.
3. Check the HDD Recorder firmware version:
   • Power on the television and make sure it is tuned to the inputs to which the HDD Recorder is connected.
   • Power on the HDD Recorder.
   • On the remote control, Press the SYSTEM MENU button.
   • Select Others
   • Press the ENTER button.
   • Select Diagnostics.
   • Press the ENTER button.
   • Select System Information.
   • Press the ENTER button.
   • The firmware version currently installed on the HDD Recorder will be listed on the television screen as SW version. If the version number is 8588 or higher, your HDD Recorder does not need to be updated.
   • To exit, press the RETURN button 3 times.