Pair Your Blu-ray Disc Player with a Bluetooth Device

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

The procedure to pair your Blu-ray Disc™ player to your Bluetooth® device will vary depending on if a Bluetooth connection has already been established or not. Follow the steps below according to your situation.

Pairing the Blu-ray Disc Player for the First Time

1. Place the Bluetooth device within 3 ft. (1 meter ) from the Blu-ray Disc player.
2. On the supplied remote control, press BLUETOOTH button.
3. On the playback screen, select Bluetooth Device.
4. Under the Bluetooth Settings, select Device List.
5. Set the Bluetooth device in pairing mode.
   • To activate the pairing mode of your Bluetooth device, check its manual.
6. Press the UP ARROW button or DOWN ARROW button repeatedly to select the Bluetooth device.
7. Press the ENTER button.
   • The Bluetooth device name will appear on the TV screen when the Bluetooth connection is established.

If Blu-ray Disc Player Is Already Paired

1. Press the HOME button.
2. Select Setup.
3. Select Bluetooth settings.
4. Check the Device List.
5. Scan and select your Bluetooth device.